HUBER Safety Vision increases the availability of machines

HUBER Safety Vision system for critical coarse material identification

An innovative building block for your digitisation strategy

The main duty of the screens installed in the inlet to sewage treatment plants is to protect downstream machines and systems and ensure perfect operation of the sewage treatment plant. When selecting the headworks screens it is usually assumed that coarse material up to a certain maximum size will occur. Increasingly, however, unforeseen material such as cans, wood pallets, large tree branches or even iron rods are also found in sewers.

Although such coarse material should definitely not be in a sewer, there is no possibility to reliably exclude they are there. If such material arrives at a screen and the screen takes it up, this may result in mechanical damage of the screen or downstream systems, such as conveyors, wash presses, etc., and this can lead to severe failures in the operation of a sewage treatment plant.

In case of impermissible material the screen can be stopped and blockage or damage of the screen or downstream systems is prevented
Warning messages and live pictures can be sent to the staff and varoius devices

The innovative system HUBER Safety Vision is able to identify critical coarse material and protect machines safely and reliably against damage. Optical sensors continuously monitor the shape and size of the coarse material taken up by the screen. The sensor data are evaluated in real time through digital image processing. Whenever the system detects any impermissible material, a warning message with image is immediately sent to the operating staff. They can decide if the screen is to continue running or stop until the material has been removed. This process reliably prevents blockage or damage of the screen or downstream systems and at the same time increases equipment availability.

Another advantage of the HUBER Safety Vision is the preventive identification of explosion risks. Accidents or failures may lead to the ingress or unpermitted feeding of inflammable liquids and gases which can cause an explosive atmosphere in the inlet to a sewage plant even if only small amounts are present in the sewer network. Knowing the explosion risks is essential for the operating reliability of the plants but especially for the health and safety of the operating staff. To ensure reliable monitoring, a sturdy scalable gas alarm device is installed directly on the machine which can trigger an alarm in real time whenever pre-defined limit values are exceeded.

HUBER Safety Vision provides the technological preconditions for a variety of applications:

  • Intelligent detection of impurities
  • Continuous monitoring and identification of abnormalities
  • Intelligent preview and early detection of disturbances
  • Continuous transmission of live images
  • Exact determination of the volume and dimensions of screenings by a continuously operating 3-D scanner and load-dependent control of downstream systems
  • Immediate signal from the image processing software to the machine control system if limits are exceeded
  • Detection of explosion risks before they can become dangerous
  • Integration of smart phones, tablet PCs and mobile or stationary displays of a PLC.

 
Due to the variety of possibilities the system provides, HUBER Safety Vision represents an important element in the digitalisation strategy of any sewage treatment plant.
 

 

Animation: HUBER Safety Vision system for impurity detection

Innovative and intelligent early detection of critical coarse material by continuous monitoring to protect screens safely and reliably against blockage and damage.

 

Products in use and related solutionsclose

Related Case Studiesclose

Related Case Studies