Manhole Covers
HUBER Manhole Covers made of Stainless Steel
The best solution for any application!
- Unrivalled durability
- Absolute corrosion protection by pickling and passivation
- Permanent safety for men and environment
Manhole cover weatherproof, square type SD1close
Manhole cover weatherproof, square type SD1
Weatherproof HUBER - stainless steel - manhole cover, square type.
Addition: with air vent, with insulation, or with air vent and insulation, with pollen filter, with fixing material and foam rubber gasket.
Application areas: well shafts, shafts at sources, steam ventilation shafts, waste water shafts, sump shafts, cover shafts, etc.
Manhole cover weatherproof, round type SD2close
Manhole cover weatherproof, round type SD2
Weatherproof HUBER - stainless steel - manhole cover, round type.
Addition: with air vent, with insulation, or with air vent and insulation, with pollen filter, with fixing material and foam rubber gasket 30/5.
Application areas: well shafts, shafts at sources, steam ventilation shafts, waste water shafts, sump shafts, cover shafts, etc.
Manhole cover extra secure, square type SD3close
Manhole cover extra secure, square type SD3
HUBER - stainless steel - manhole cover, weatherproof, extra secure to prevent forced access, square type.
Addition:with air vent, with insulation, or with air vent and insulation, with pollen filter.
Application areas: well shafts, shafts at sources, steam ventilation shafts, waste water shafts, sump shafts, slide shafts, etc.
Manhole cover extra secure, round type SD4close
Manhole cover extra secure, round type SD4
HUBER - stainless steel - manhole cover, weatherproof, extra secure to prevent forced access, round type.
Addition: with air vent, with insulation, or with air vent and insulation, with pollen filter.
Application areas: well shafts, shafts at sources, steam ventilation shafts, waste water shafts, sump shafts, slide shafts etc.
Manhole cover watertight, square type SD5close
Manhole cover watertight, square type SD5
HUBER - stainless steel - manhole cover, watertight up to 1m head of water, square type.
Addition: fixing material and foam rubber gasket 30/5.
Application areas: als shafts in flooded areas, such as well shafts, shafts at sources, steam ventilation shafts, waste water shafts, sump shafts, slide shafts etc.
Manhole cover watertight, round type SD6close
Manhole cover watertight, round type SD6
HUBER - stainless steel - manhole cover, watertight up to 1m head of water, round type.
Addition: fixing material and foam rubber gasket 30/5.
Application areas: als shafts in flooded areas, such as well shafts, shafts at sources, steam ventilation shafts, waste water shafts, sump shafts, slide shafts.
Manhole cover load bearing, square type SD7close
Manhole cover load bearing, square type SD7
HUBER - stainless steel - manhole cover, weatherproof, load bearing up to 15
2000
kN, up to 125 kN, up to 400 kN, certificated as burglar-proof, test load as per DIN 1229, completely made of stainless steel.
Application areas: for manholes in walking and driving areas.
Manhole cover load bearing, round type SD7.Rclose
Manhole cover load bearing, round type SD7.R
HUBER - stainless steel - manhole cover, weatherproof, load bearing up to 15 kN, up to 125 kN, up to 400 kN, round, certificated as burglar-proof, test load as per DIN 1229, completely made of stainless steel.
Application areas: for manholes in walking and driving areas.
Manhole cover surcharge proof, load bearing SD8close
Manhole cover surcharge proof, load bearing SD8
HUBER - stainless steel - manhole cover, weatherproof, load bearing up to 15 kN, up to 125 kN, up to 400 kN, surcharge proof up to 0,2 bar, test load as per DIN 1229, completely made of stainless steel.
Application areas: for covering manholes in walking and driving areas.
Manhole cover with a variety of surface finishes SD10close
Manhole cover with a variety of surface finishes SD10
HUBER - stainless steel - manhole cover, with a variety of surface finishes.
Application areas: for covering manholes in window areas where matching floor finish is required.
Channel cover SD11close
Channel cover SD11
HUBER - stainless steel - channel cover.
Forms of application: cover of channels for good accessibility, in order to avoid odour problems and for reasons of safety.
Sliding hatch cover SD12close
Sliding hatch cover SD12
HUBER - stainless steel - sliding hatch cover.
Forms of application: stormwater holding tanks, underground container, for access to manholes. By shifting the cover there is a large free opening so that access is also possible with ladders.
HUBER emergency exit SDNclose
HUBER emergency exit SDN
HUBER - emergency exit, manhole cover which can be opened from inside, self-lifting
Safety for operating and service personnel by independently opening emergency exit for shaft building and roofs.
Accidents in the channel network or in building are rare, but unfortunately not impossible. When there is fire or toxic gas, lives of men are in great danger. This is the same with burst pipes or fire due to flammable liquids flowing into channels as well as domestic fuel. In these cases it is the matter of seconds and manhole openings and skylights must open independently: the emergency exit can save life and is therefore very significant.
With the HUBER emergency exit you can choose between load bearing and walkable manhole covers and they are, like all the other manhole covers, made of stainless steel. Due to pickling bath and passivation it is corrosion and maintenance-free for a long time. Gas assisted spring dampers take over the independant opening of the emergency exits.
In one movement the manhole cover respectively the sky light is open. It can be wall mounted or embedded in concrete.
Products
Products
More products of this group:
Benefits
Benefits
HUBER manhole covers - safety for the operator
feature | advantage | benefit |
stainless steel, acid-treated in a pickling bath and passivated | long life, hygienic | cost-saving as no refurbishing is required |
stormwater-tight | protection against wetness | dry manholes |
stainless steel gas pressure spring | easy to open (corrosion-resistant as well) | easy to open by one person |
covered hinges | prevention of unauthorised access | burglarproof |
self-retracting anti-closing device | no need for manual service | protection against unintended closing |
self-retracting lock | quick and easy to close | again easy to operate |
protective hood of brass | prevents injuries, protects against wetness, serves as an additional safety lock | maintenance-free |
cover plate with a centrally raised profile | stormwater runs off; stability | walkable; stagnant water is prevented |
vapour hood | optimal manhole ventilation | dry manholes |
insect filter | prevents the entrance of small animals | ventilation without any risk of pollution |
foamed insulation | complete thermal insulation without any cold bridges | reduces formation of spray water |
frames suitable for combination | suitable for two installation types | installation is possible prior to and after completion off the structure, wrong purchases are avoided |
safety lock suitable for retrofitting | additional safety lock | to be retrofitted whenever requested |
available from stock | short-term availability | short delivery times avoid site standstills |
Practise Reports
Practise Reports
Data Sheets
Data Sheets
Photos
Photos
2000
