HUBER Sludge Acceptance Plant RoFAS

Wash drum for efficient and reliable coarse material separation for septic sludge

Rotating high-performance screening drum for extreme applications.

Reliable, clog-free solids transport through forced guided material transport within the drum.

Solids washing and dewatering by means of a subsequent HUBER Screenings Wash Press, type WAP®.

  • High solids throughput
  • Optional simultaneous emptying of several vehicles
  • Minimum wear
  • Two-dimensional screening

Read more...close

While wash water is added to pre-wash and homogenise the raw material within the HUBER Sludge Acceptance Plant, the perforated plate of the wash drum retains all particles > 10 mm, which are dewatered and then discharged into a skip. Since only coarse material > 10 mm is separated, the volume of the resultant residues is vastly reduced with virtually the complete mineral material being further treated in the down-stream HUBER Coanda Grit Washer RoSF4. The resultant coarse material can then be further separated into a mineral and organic fraction by means of a coarse material washer.

Products

Benefits

Benefits

Advantages of the HUBER Sludge Acceptance Plant RoFAS

  • Wash Drum with high solids throughput even with problematic material (tresses, grease, stones)
  • High hydraulic capacity even with high solids contents
  • Defined separation size due to two-dimensional screening
  • Feeding from a conveyor, through a launder channel or pressure line
  • Completely encased unit
  • Insensitive to coarse material
  • 3 to 100 mm separation size
  • Screened wastewater can be used as wash water
  • Short tanker vehicle emtpying times
  • Optional simultaneous emptying of several vehicles
  • Minimum wear, reduced maintenance
  • Compact, space-saving design
  • Low energy demand
  • Manufactured entirely of stainless steel for maximum corrosion resistance

Case Studies

Downloads

Media

request further product information